Faithfull Butt Welding Clamps are an essential accessory for aligning sheet metal panels edge-to-edge and surface-to-surface. They provide the correct gap to help produce clean welds, requiring minimal grinding after completion. The clamps are simple to use for assembling and fabricating. Ideal for use when welding patch repairs in floors, wings, door skins or fabricating panels on reskinning projects. These versatile clamps will hold flat, curved and pressed ribbed panels. Using the clamps to assemble the workpiece: Slacken the wing nut allowing space for the metal sheets to locate between the base of the clamp, with the toggle bar underneath. Tighten the wing nut to pull the toggle bar up locking the two sheets together side by side. Once the two sections have been tack welded together, the wing nut can be slackened and the toggle bar removed, the clamp can then be lifted from the job prior to final welding.

Sheet Metal Butt Welding Clamps 4 Piece

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.