Kitchen Drawer / Cupboard LED Lights PIR MOTION SENSOR Whats Included: 1x Natural White, Drawer / Cupboard LED Light With PIR ON/OFF Motion Detector1x 3 Port, 8W DriverTechnical Specification: LED LightsPIR Motion Sensor Timer Will turn on and keep on when door has been opened, will automatically turn off when door is closed onto the sensor Light Casing Colour AluminiumLight Colour Appearance Natural WhiteColour Temperature 4000 ÷ 3500 KelvinVoltage12Vdc (per light)Colour Wattage 2.5W (per light)Number of Hours 30,000 Colour Rendering Index Ra 83Cable Length ( per light) 1.5mColour IP20 RatedWidth of Fitting (including sensor) 400mmWidth of LED Light 360mmDriver Voltage 12VdcColour Wattage 8W3 Way / Port What is a Driver? A driver converts mains voltage (240V AC) to 12V DC. Our range of efficient kitchen lights run on a low voltage, this conserves energy without compromising on luminosity. Every light that we sell has a Colour Wattage rating. For example, if you have a light rated at 2.6W and you have 3 of them, your total Colour Wattage consumption would be 7.8W. To put this simply, your drivers Colour Wattage rating must be equal to or greater than 7.8W in order for this to work (pulling through more watts than a driver is rated to will cause the driver to blow). We know that this can sound a little tricky so in order to save you the hassle of working this out, all our light kits include a driver that is specifically designed to work safely and efficiently with your chosen lights. How to Mount? These lights are designed to be surface mounted inside the top of a cupboard or drawer. Each light should be installed facing downwards as pictured in order to fill your unit with light. The sensor located to the side of the light fitting will turn the light off when an item is within a certain range of it (a unit door for example). When the door is opened, it will move away from the sensor causing the light to power on and illuminate your units. The light will then simply turn off when the door is closed again. Each light is supplied with 2 low profile mounting brackets that the strip light will sit it once mounted, this is fixed using the supplied fixing screws. The sensor is built into the light itself so no need to mount anything else to your doors. You can now connect the cable on the light to the supplied driver and connect that to the mains. Once connected to power, the lights will automatically turn on when movement is detected as mentioned above. No individual light switches are required for this strip light. We also sell a 2m extension cable allowing a longer run from the light to the driver. Please search our shop or feel free to get in touch.Further Information :This range of LED lights will modernise any room in an affordable way. Our lights pack the punch of a halogen bulb with the life and energy efficiency of an LED. Each light has a diffused cover, so no individual LED points are visible, providing a whole beam effect. Each bulb will last for over 30,000 hours and on average, will last 16 years. After this period the bulbs will only reduce in brightness, meaning they will continue to work. This strip light is available in the following sizes so there should be one out there for most drawers and cupboards: 400mm500mm600mm800mm900mm1000mmMultiple lights can be connected to a single driver so please get in touch if you have a custom requirement. We will be more than happy to quote you for your perfect system.

Weight (kg) - 0.25 Material/Finish - Multi Details of what's included - Please see the description tab for a full list of what is included. Care/assembly instructions - Supplied Battery type required – N/A Number of batteries required (included/not included?) – N/A Brand - LoopsDirect.com Product code - s244

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.