2xActive Bluetooth Low Profile Ceiling Speaker Kits and Link CableKit Contents: 2x Active Bluetooth Speaker2x Passive Speaker2x 12V DC UK Mains Power Supply (1m Length)2x 3m Speaker Cable (joins active and passive speakers together)2x Ceiling Cut-Out Templates1x 10m System Daisy Chain Connecting CableOverview:Our Active Bluetooth ceiling speaker kit is incredibly simple to install and offers unrivalled sound quality and style for its price. This system boasts a genuinely impressive maximum volume of 50W and delivers a high level of bass for a ceiling speaker, resulting in a crystal clear and complete audio experience.Thanks to the system being Active, you do not need an amplifier to power them. One of the speakers in each kit has a built-in amplifier and Bluetooth receiver. Once powered up using the supplied power cable, you can stream music to the first pair of speakers wirelessly via Bluetooth from your Smartphone or Tablet for example. All features such as controlling volume or skipping tracks ETC are controlled from your device, it couldn t be simpler!Thanks to the Bluetooth receiver being compatible with our SMART HOME range, you can connect this to the Amazon Echo / Google Home as our system is NOT password protected for pairing. Don t worry, once connected you cannot be thrown off by another user.Installing the speakers:This is as simple as installing any other ceiling speaker, simply cut-out 4 holes in your ceilings for the speakers, a guide template is supplied to make marking the holes as easy as possible.The next thing you need to do is ensure that you have a mains power source in the ceiling so that you can plug our power supply into it. You will need 1 mains feed for each kit (per 2 speakers). After that, feed the supplied 3m speaker cable from the first hole you have cut out to the second hole you have cut out (for each kit). If you need a longer length of cable, please get in touch as we can supply you with this but as a general rule, you don t want the Active and Passive speakers to be too far apart. Now you need to run the supplied RCA cable to the next kits cut out location. Simply plug one end of this cable into the connection labelled LINE OUT on your main active speaker. The other end of this cable will plug into the next active speaker from the second kit into the connection labelled LINE IN . Connecting these two together integrates both sets into 1 system allowing you to play through all speakers at the same time.PLEASE NOTE only connect to the 1st main speaker via Bluetooth, if you connect to any others down the line, it will only feed the other speakers that come after it. If this is a little too technical for you. Please get in touch and we would be more than happy to explain it to you.The final step is to fit the speakers to the ceiling and connect the active and passive speakers from each kit together via the pre-installed speaker cable. No soldering or crimping is required, just a screwdriver. When you have inserted the speakers into the ceiling, simply tighten the screws underneath the grille that are connected to the dog-ear mounts, as you tighten, they will grip to the ceiling guaranteeing a sturdy installation. Don t worry if that didn t make sense, an illustrated instruction manual is supplied to help you.A lot of speakers on the market can look bulky and cumbersome but once installed, our speakers sit almost flush to the ceiling and the magnetic frameless grille has an extremely low profile. The fine mesh grilles can be removed easily for cleaning and repainting, should you need them to match your decor.Technical Specification: Power supply In-line 100-240VAC/12VDC PSU (included) Output power: max. 2 x 25W Output power: RMS 2 x 20W LF driver 165mmdia (6.5") rubber edge PP cone HF driver 12mm (0.5") neodymium dome tweeter Frequency response 70Hz20kHz Sensitivity 89dB Dispersion angle 160 dia ­ ° Housing material ABS plastic Mounting depth 100mm (active), 80mm (passive) Cutout 202mmdia (each speaker) Impedance 4 Ohms (each speaker) Dimensions 98 x 234mmdia (active), 77 x 234mmdia (passive) Weight (per set) 1.91kgIf you require any technical advice or would just like a chat with our technical department to see if this would be the right kit for you, please feel free to get in touch.

Weight (kg) - 4.72 Material/Finish - Multi Details of what's included - Please see the description tab for a full list of what is included. Care/assembly instructions - Supplied Battery type required – N/A Number of batteries required (included/not included?) – N/A Brand - LoopsDirect.com Product code - 3847

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.