The Halls M2 Powerbor® Cutters allow holes to be produced quickly and more efficiently than conventional drills. Due to the cutter design, the load per tooth is greatly reduced and power used by the machine is kept to a minimum. The cutters are suitable for use on steel, and produce a solid slug which is ejected when the cutter breaks through and the hole is complete. This helps to reduce problems experienced by the swarf and chips that are generated by conventional drilling. Each diameter has a maximum cutting depth of 25mm.

The Halls M2 Powerbor® Cutters allow holes to be produced quickly and more efficiently than conventional drills. Due to the cutter design, the load per tooth is greatly reduced and power used by the machine is kept to a minimum. The cutters are suitable for use on steel, and produce a solid slug which is ejected when the cutter breaks through and the hole is complete. This helps to reduce problems experienced by the swarf and chips that are generated by conventional drilling. Each diameter has a maximum cutting depth of 25mm.

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.