Features: Superior MPPT Technology: This 100A MPPT solar controller has an advanced MPPT maximum power point tracking technology algorithm. It automatically recognizes 12V/24V/36V/48V systems and has dual USB 5V charging ports. with a tracking efficiency of no less than 99.5%. This greatly improves the energy utilization of the solar system. LCD Backlight: The controller is equipped with a multi - function LCD with backlight display and clock. The upgraded version supports precise time control, enabling devices to be automatically powered on and off as per the user - set time. Also, it can stay in a continuous bright - screen state without entering hibernation or lock mode. User - Centric Design: The LCD is made to dynamically show the operational data and working status of the equipment. It displays controller parameters like working mode, battery voltage, PV charging current, battery discharging current, product working temperature, and delay time. 7 Kinds of Working Mode Selection: It provides seven operating modes: charging mode, light control mode, light control + time delay control mode, universal control mode, manual control mode, timing control mode and test mode. Reset to Factory Settings: For situations needing configuration resets or default settings restoration, a “reset to factory settings” function is added, offering a quick and effective solution. Diverse Battery Charging Options: The controller is compatible with various batteries, including Seal, GEL, Flooded, and LifePO4. Comprehensive Voltage Protection: The MPPT solar controller offers extensive voltage protection, including protection against battery over - voltage, over - current, power failure, overcharge, deep discharge, reverse connection, and overheating. Moreover, the device can display the real - time voltage of the solar panel, helping users monitor and optimize energy use, ensure normal operation, and assist in troubleshooting. Specifications: Type: MPPT Solar Charge Controller Material: Plastic + Aluminum Alloy Product Size: 60A/80A/100A 19.318.56.6cm /7.67.32.6 inches Battery Voltage: 12V/24V/36V/48V Automatic Charging Current: 60A/80A/100A Maximum Solar Input (Voc): 15 - 25V (12V Battery); 30 - 50V (24V Battery); 45 - 75V (36V Battery); 60 - 100V (48V Battery) Maximum Input Power of Photovoltaic Panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Maximum PV Input Power: (60A) 720W (12V battery); 1440W (24V battery); 2160W (36V battery); 2880W (48V battery) (80A) 960W (12V battery); 1920W (24V battery); 2880W (36V battery); 3840W (48V battery) (100A) 1200W (12V battery); 2400W (24V battery); 3600W (36V battery); 4800W (48V battery) Support Battery: Gel battery, Lead - acid battery, LifePO4, Flooded, Seal 7 Kinds of Working Mode Selection: Charging mode: Never discharge in any case. Light control mode: When the controller detects night, it delays for ten minutes and then starts to discharge; when it detects daytime, it delays for ten minutes and then stops discharging. Light and time delay control mode: When the controller detects night, it delays for ten minutes, starts to discharge and counts down. If the timer reaches zero, the discharge stops. The maximum delay duration is 23:59. Universal control mode: Under trouble - free conditions, it always keeps discharging. Manual control mode: Uses “▼” to decide whether to discharge. Timing control mode: Opens or closes the discharge regularly. Test mode: Same as light and time delay control mode but without the ten - minute time delay. The controller still discharges under low - voltage protection. Touch - hold “▼” for 5 seconds, and the discharge continues to output. But the discharge only stops manually. Note that this may damage the battery, so use it with caution! Note: Please connect the battery to the controller first, and then the photovoltaic panel. Ensure that the battery voltage is higher (12V battery higher than 10V; 24V battery higher than 20V; 36V battery higher than 30V; 48V battery higher than 40V), otherwise it will cause a voltage identification error. Package Included: 1 x MPPT Solar Controller 1 x User Manual 1 x 5m Electrical Tape

Package Included: 1 x MPPT Solar Controller 1 x User Manual 1 x 5m electrical tape

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.