Fresh formula feeds anytime, anywhere in just 2 minutes Make fresh formula feeds on the go with this clever set featuring two flasks — one stores boiling water to kill bacteria, and the other cools the feed to the perfect temperature in just two minutes*. The easy-to-read LED display on the lid shows a star that changes colour to tell you when the feed is ready: red means too hot, blue means perfect. Designed to follow NHS guidelines, the PrepGo system ensures your baby’s feed is safe and fresh wherever you are. The set includes two powder dispensers, each holding enough formula for an 8oz feed, and all components are BPA free for peace of mind. Cleaning is simple with warm soapy water and a sterilising method using boiling water. Key Points One flask stores boiling water to kill bacteria One flask cools feed to perfect temperature in 2 minutes* LED colour-coded star shows when feed is ready Two powder dispensers, each holds 8 scoops (8oz) formula BPA free and easy to clean with included brush Sterilising method using boiling water included *Based on preparing a 120ml feed, cooling to 40°C.

How to Use 1. Clean and disinfect the surface you are going to use. It is important that you wash your hands. 2. Fill the kettle with fresh tap water (do not use water that has been boiled before). Boil the water. 3. Take care when handling freshly boiled water. USING THE HOT FLASK AND COOLING FLASK: 1. Fill the hot flask with boiling water, and take out of the home with you. 2. Measure out the formula as per manufacturer instructions and store in the milk powder dispenser until you are ready to use. 3. When you are ready to feed, attach the digital lid to the hot flask and tilt the flask sideways for a minimum of 5 seconds to ensure the water is still hot enough and safe to make a feed. The star on the digital lid should turn red. 4. You can now pour the water from the hot flask into the cooling flask using the graduation marks on the inside of the flask for correct measurements 5. Add the correct amount of formula powder, as per manufacturers guidelines, in line with the amount of water in the flask. 6. Screw the digital lid onto the cooling flask, ensuring it is assembled correctly, and shake well to mix the powder with the hot water, ensuring it's fully dissolved. Shaking the cooling flask starts the cooling process. 7. The time it takes for the feed to cool depends on the feed size, refer to the table below. To check if a feed is ready to dispense into a baby bottle, tilt the cooling flask sideways for a minimum of 5 seconds so the milk touches the digital lid. The lid will show a blue star when the feed is ready. Don’t dispense the feed before 2 minutes 8. Decant your feed into a clean, sterile bottle. And follow bottle feeding instructions. 9. Always check the temperature before feeding your baby. Once a feed is made, use straight away. USING THE COOLING FLASK: 1. Add the boiled water to the cooling flask, using the graduation marks on the inside of the flask. 2. Add the correct amount of formula powder, as per manufacturers guidelines, in line with the amount of water in the flask. 3. Screw the digital lid onto the cooling flask, ensuring it is assembled correctly, and shake well to mix the powder with the hot water, ensuring its fully dissolved. Shaking the cooling flask starts the cooling process. 4. The time it takes for the feed to cool depends on the feed size, refer to the table below. To check if a feed is ready to dispense into a baby bottle, tilt the cooling flask sideways for a minimum of 5 seconds so the milk touches the digital lid. The lid will show a blue star when the feed is ready. Don’t dispense the feed before 2 minutes 5. Decant your feed into a clean, sterile bottle. And follow bottle feeding instructions. 6. Always check the temperature before feeding your baby. Once a feed is made, use straight away.

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.