Description Professional thread repair kit for commercial or own occasional / home use M10 x 1.5mm thread repair kit Metric thread repair kit / set Suitable for repairing stripped, damaged or corroded internal threads Protects tapped threads against wear and damage Creates a stronger internal thread in soft materials Permanent repair to worn and damaged threads Stainless steel helicoil for maximum strength and durability Stainless steel so wont rust and rot Easy and simple to use Due to the narrow and exact tolerances the new thread is normally stronger

SIMPLE TO USE 1. DRILLING – Clear the damaged thread with a standard drill – the kit includes the correct size drill 2. CHECK – Check that the thread and pitch of the tap and the bolt match 3. TAPPING – Use the special V-coil taps for cutting the holding thread into the cleared hole. It is recommended to use a suitable cutting oil 4. INSTALL THE INSERT – place insert on installation tool and position the adjustable ring so that the insert tang is centred on the tang slot. Wind the insert in with a light downward pressure until half a turn below the surface 5. TANG REMOVAL – after finishing remove the installation tool and use the tang break tool to remove the tang SET INCLUDES THE FOLLOWING 1 x HSS Drill Bit 1 x HSS thread tap 1 x insert installation tool 1 x tang breaking tool 1 x 2mm hex key 10 x M10 x 1.5mm X 13.5mm inserts

Something not quite right? You have 21 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.