Use WAVE™ pH Increaser to raise the pH of the swimming pool and spa water.

Use WAVE™ pH Increaser to raise the pH of the swimming pool and spa water. The pH of the water should be correctly maintained to ensure bather comfort and the protection of the pool or spa and its equipment. Dose Rate 10g of WAVE pH Increaser per 1000 litres of water. Application: Ideally the pH of the water should be maintained around 7.4. If the pH falls to, or below 7.2, add WAVE™ PH Increaser into 10 litres of fresh water, using a clean plastic container and mix carefully. Slowly pour the solution into the pool or spa water close to the return inlets and rinse out the container thoroughly. After 24 hours, recheck the pH and repeat the treatment dose as necessary.

Something not quite right? You have 28 days from the day you receive it, to send something back.

Please note, we cannot offer refunds on fashion face masks, cosmetics, pierced jewellery, adult toys, and swimwear or lingerie if the hygiene seal is not in place or has been broken.

Items of footwear and/or clothing must be unworn and unwashed with the original labels attached. Also, footwear must be tried on indoors. Items of homeware including bedlinen, mattresses, and toppers, and pillows must be unused and in their original unopened packaging. This does not affect your statutory rights.

Click here to view our full Returns Policy.